Fineagles Advance Engineering: İşletmesi Hakkında: İnşaat Tedarik Bilgileri

·Şirket

Stacker

This process is designed to stack finished panels efficiently at the production speed. It is very important that the stacking speed should not be slower than panel production speed. It is possible to stack panels by an automatic or manual operation.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Side Guide and PE Block System

This unit is designed for preventing PU foam from leaking out of panel lateral by PE blocks and maintaining uniform foaming while double belt conveyor presses PU foaming pressure and conveys PU panel.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Side Guide and PE Block System

This unit is designed for preventing PU foam from leaking out of panel lateral by PE blocks and maintaining uniform foaming while double belt conveyor presses PU foaming pressure and conveys PU panel.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Side Guide and PE Block System

This unit is designed for preventing PU foam from leaking out of panel lateral by PE blocks and maintaining uniform foaming while double belt conveyor presses PU foaming pressure and conveys PU panel.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Cross cutter (Band saw + Disk saw)

The perfect cutting unit has to have the cutting speed is synchronized with the panel conveying speed. This cutting unit has to be also operated by the manual or automatic control. The gantry is set at the rear and the saw unit is positioned at the right-hand side as viewed from direction of production.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Cross cutter (Band saw + Disk saw)

The perfect cutting unit has to have the cutting speed is synchronized with the panel conveying speed. This cutting unit has to be also operated by the manual or automatic control. The gantry is set at the rear and the saw unit is positioned at the right-hand side as viewed from direction of production.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Cross cutter (Band saw + Disk saw)

The perfect cutting unit has to have the cutting speed is synchronized with the panel conveying speed. This cutting unit has to be also operated by the manual or automatic control. The gantry is set at the rear and the saw unit is positioned at the right-hand side as viewed from direction of production.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Cooling conveyor

When customer want to produce PIR panel, this cooling conveyor is necessary to cool down the heat of PU panel. In the production of PIR panel, which is produced a lot recently, as it reacts at higher temperature and generates more heat than general PU panel, cooling conveyor to cool the panel just produced down gradually at room temperature is needed.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Cooling conveyor

When customer want to produce PIR panel, this cooling conveyor is necessary to cool down the heat of PU panel. In the production of PIR panel, which is produced a lot recently, as it reacts at higher temperature and generates more heat than general PU panel, cooling conveyor to cool the panel just produced down gradually at room temperature is needed.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Stacker

This process is designed to stack finished panels efficiently at the production speed. It is very important that the stacking speed should not be slower than panel production speed. It is possible to stack panels by an automatic or manual operation.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Heating system for double conveyor

PU foam dispensed between the upper and lower coil has the perfect chemical reaction and curing process at regular temperature. This unit is designed for providing a heated air to maintain a regular temperature for such process.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Uncoiler and Coil Car

Up & down-lift are achieved by the use of a hydraulic cylinder which moves right and left supported by 4 wheels by 4 wheels on a rail. Two units are needed for Upper Coil and Lower Coil operation. The steel sheet(coil) is mounted on an uncoiler by the coil car at which point 4 wedges are expanded, and then 4 wedges are expanded, fixed by hydraulic power, and then driven by a motor. A rubber roller is mounted above the uncoiler for the purpose of preventing the coil (steel sheet) from suddenly uncoiling and over-uncoiling in motion.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Uncoiler and Coil Car

Up & down-lift are achieved by the use of a hydraulic cylinder which moves right and left supported by 4 wheels by 4 wheels on a rail. Two units are needed for Upper Coil and Lower Coil operation. The steel sheet(coil) is mounted on an uncoiler by the coil car at which point 4 wedges are expanded, and then 4 wedges are expanded, fixed by hydraulic power, and then driven by a motor. A rubber roller is mounted above the uncoiler for the purpose of preventing the coil (steel sheet) from suddenly uncoiling and over-uncoiling in motion.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Roll Forming Machine

The upper roll forming unit is primarily responsible for shaping the forms of both sides of the lower coil (steel sheet) for the use of roof & wall (incl. Inner) panels’ joint parts. The Lower roll forming unit forms, Roof 4 rib and SS (Cold room) panel Type for installation are moveable rail type Roll driving is gear box type.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Roll Forming Machine

The upper roll forming unit is primarily responsible for shaping the forms of both sides of the lower coil (steel sheet) for the use of roof & wall (incl. Inner) panels’ joint parts. The Lower roll forming unit forms, Roof 4 rib and SS (Cold room) panel Type for installation are moveable rail type Roll driving is gear box type.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

Pre Heating

This unit is used for preheating the upper and lower steel sheet to a moderate temperature after roll forming process.As polyurethane reacts chemically under moderate heat, the heating process for the steel sheet activates PUR and make the adhesive strength between the steel sheet and PU foam stronger.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

PU & PIR Foaming Machine

One of the most important part of the sandwich panel line is the PU foaming machine. Panel quality depends on the performance PU machine. The PU foaming machine consists of pump for: Iso Polyol Catalyst (1/2/3) Blowing agent (Pentane) Depending on the number of catalysts used, the components of PU machine are determined. 4-6 component machines are mostly used.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

PU & PIR Foaming Machine

One of the most important part of the sandwich panel line is the PU foaming machine. Panel quality depends on the performance PU machine. The PU foaming machine consists of pump for: Iso Polyol Catalyst (1/2/3) Blowing agent (Pentane) Depending on the number of catalysts used, the components of PU machine are determined. 4-6 component machines are mostly used.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

PU & PIR Foaming Machine

The oscillating movement of the mixing head is essential to achieve an optimum application of the PUR-mixture onto the lower facing layer. The mixing head is actuated by means of an A.C servo motor and its toothed belt enables a free programmable oscillating movement across the total panel width. There is no noise from the movement of the Foaming Portal.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat

Fineagles Advance Engineering

·Şirket

PU & PIR Sandwich Panel Production line

Up & down-lift are achieved by the use of a hydraulic cylinder which moves right and left supported by 4 wheels by 4 wheels on a rail. Two units are needed for Upper Coil and Lower Coil operation. The steel sheet(coil) is mounted on an uncoiler by the coil car at which point 4 wedges are expanded, and then 4 wedges are expanded, fixed by hydraulic power, and then driven by a motor. A rubber roller is mounted above the uncoiler for the purpose of preventing the coil (steel sheet) from suddenly uncoiling and over-uncoiling in motion.

Fiyat tanımlanmadı - Teklif için iletişime geçin

Afganistan, Aland Adaları ve 247 daha

Anlaşma Başlat