Kopuzlar EVA Kauçuk A.Ş.

·Company

EVA FOAM

Known globally as EVA (Ethylene Vinyl Acetate), and produced utilizing press technology, this technological product group is one which we have the ability, contrary to popular belief, to manufacture using not only EVA but also other raw materials such as polyethylene. We create significant added value by harnessing the ability to use recycled raw materials in our production processes. In this way, EVA helps both to protect the ecological balance and to make real contributions towards creating a sustainable economic system.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

Kopuzlar EVA Kauçuk A.Ş.

·Company

XPE FOAM

Attributing to its superior insulation properties and widespread usage areas, XPE foam has become a prominent material in international literature. Our cross-linked polyethylene foam products, which we manufacture using furnace technology with a mixture of polyethylene raw material and various agents, can be supplied in a density range of 27 kgm³ - 180 kgm³and thicknesses between 3 mm and 80 mm. We use thermal lamination technology to produce products with high thickness.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

Kopuzlar EVA Kauçuk A.Ş.

·Company

EPDM

Our EPDM products, which have much higher heat and sound insulation values compared to similar insulation products, are produced with a press production system by mixing rubber and EVA raw materials with each other to create a chemical composition with unique properties. EPDM Rubber, with its saturated chemical structure, has a high resistance to outdoor conditions. Although it is an insulation board that is often used by the automotive sector, it has recently been adopted by a range of other industries.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

Kopuzlar EVA Kauçuk A.Ş.

·Company

SECOND FOAM

These block products, produced using press technology, are the result of a two-stage process. In the first stage, the products are cooked in press moulds for the duration of the process. Subsequently, the products coming out of the mould are baked again and expanded to a thickness of 100 mm. In this fashion, the density can be reduced to 30 kgm³. Second foam can be produced from a mixture of EVA, rubber and polyethylene raw materials or alternatively from 100% polyethylene raw material. This product group is used as a substitute for physically cross-linked polyethylene products, especially in the adhesive tape foam sectors, for surface applications that require high quality levels.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare