GooPlast

·Company

Arkad Kalıcı Kalıp

rkad Kalıcı Kalıp sistemi, Yalın inşaatın temel değerlerini oluşturan minimum maliyet ve maksimum fayda ilkesine uygun olarak, verimliliği arttırmak için yeni veya yenilenen konut ve iş yerlerinde, ofis, iş ve alışveriş merkezlerinde, mekanik ve elektrik kablo tavalarını, sıhhi tesisat borularını şap altında boşluklar oluşturarak geçirilmesine imkan sağlayan, yüksek yük taşıma kapasitesine sahip beton ve betonarme yükseltilmiş döşeme sistemidir. Minumum 8,5cm ayaksız, 12cm ayaklı olmak üzere istenilen yüksekliğe ayarlanabilen geri dönüştürülmüş plastiklerden üretilen, binalarda şap altında kullanılabilen uygun maliyetli ve inşaata zaman kazandıran yükseltilmiş döşeme çözümüdür.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Arkad Under Screed Mold Detail

Arkad Permanent Formwork system, in accordance with the principle of minimum cost and maximum benefit, which constitutes the basic values ​​of lean construction, creates spaces under the screed of mechanical and electrical cable trays, sanitary installation pipes in new or renovated residences and workplaces, offices, business and shopping centers in order to increase efficiency. It is a concrete and reinforced concrete raised floor system with high load carrying capacity. It is a cost-effective and time-saving raised floor solution that can be used under screed in buildings, produced from recycled plastics that can be adjusted to the desired height, with a minimum of 8.5 cm without feet and 12 cm with feet.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Arkad Lobby Application

Arkad Permanent Formwork system, in accordance with the principle of minimum cost and maximum benefit, which constitutes the basic values ​​of lean construction, creates spaces under the screed of mechanical and electrical cable trays, sanitary installation pipes in new or renovated residences and workplaces, offices, business and shopping centers in order to increase efficiency. It is a concrete and reinforced concrete raised floor system with high load carrying capacity. It is a cost-effective and time-saving raised floor solution that can be used under screed in buildings, produced from recycled plastics that can be adjusted to the desired height, with a minimum of 8.5 cm without feet and 12 cm with feet.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Arkad Under Screed Mold Detail

Arkad Permanent Formwork system, in accordance with the principle of minimum cost and maximum benefit, which constitutes the basic values ​​of lean construction, creates spaces under the screed of mechanical and electrical cable trays, sanitary installation pipes in new or renovated residences and workplaces, offices, business and shopping centers in order to increase efficiency. It is a concrete and reinforced concrete raised floor system with high load carrying capacity. It is a cost-effective and time-saving raised floor solution that can be used under screed in buildings, produced from recycled plastics that can be adjusted to the desired height, with a minimum of 8.5 cm without feet and 12 cm with feet.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Arkad Hotel Room Application

Arkad Permanent Formwork system, in accordance with the principle of minimum cost and maximum benefit, which constitutes the basic values ​​of lean construction, creates spaces under the screed of mechanical and electrical cable trays, sanitary installation pipes in new or renovated residences and workplaces, offices, business and shopping centers in order to increase efficiency. It is a concrete and reinforced concrete raised floor system with high load carrying capacity. It is a cost-effective and time-saving raised floor solution that can be used under screed in buildings, produced from recycled plastics that can be adjusted to the desired height, with a minimum of 8.5 cm without feet and 12 cm with feet.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Arkad Office Application

Arkad Permanent Formwork system, in accordance with the principle of minimum cost and maximum benefit, which constitutes the basic values ​​of lean construction, creates spaces under the screed of mechanical and electrical cable trays, sanitary installation pipes in new or renovated residences and workplaces, offices, business and shopping centers in order to increase efficiency. It is a concrete and reinforced concrete raised floor system with high load carrying capacity. It is a cost-effective and time-saving raised floor solution that can be used under screed in buildings, produced from recycled plastics that can be adjusted to the desired height, with a minimum of 8.5 cm without feet and 12 cm with feet.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Arkad Bathroom Application

Arkad Permanent Formwork system, in accordance with the principle of minimum cost and maximum benefit, which constitutes the basic values ​​of lean construction, creates spaces under the screed of mechanical and electrical cable trays, sanitary installation pipes in new or renovated residences and workplaces, offices, business and shopping centers in order to increase efficiency. It is a concrete and reinforced concrete raised floor system with high load carrying capacity. It is a cost-effective and time-saving raised floor solution that can be used under screed in buildings, produced from recycled plastics that can be adjusted to the desired height, with a minimum of 8.5 cm without feet and 12 cm with feet.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Dome Permanent Formwork System Outdoor Application

Dome Permanent Formwork system is a cost-effective and time-saving lightweight construction filling solution that can be used in projects instead of foundation, sub-basement and landscaping fillings on raised floors in buildings, produced from recycled plastics that can be adjusted in height. A hygienic space is obtained on the floors where moisture is prevented. If this space is properly ventilated outside by using a pipe system, it ensures the removal of moisture and Radon gas present on the ground. It provides speed, simplicity and cost performance in construction to its stakeholders. It offers speed, simplicity and cost performance in construction to its stakeholders. Inspectable subsurface space after manufacturing. Floor elevation without the need for filler material High weight bearing capacity. Requires less on-site storage as the molds can be stacked It saves time with an application that is 80% easier and faster than traditional systems. Thanks to its many columns and domes, it can be adjusted in height up to 3 meters and can be used for ramps, stairs or different level surfaces.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Dome Permanent Formwork System Outdoor Application

Dome Permanent Formwork system is a cost-effective and time-saving lightweight construction filling solution that can be used in projects instead of foundation, sub-basement and landscaping fillings on raised floors in buildings, produced from recycled plastics that can be adjusted in height. A hygienic space is obtained on the floors where moisture is prevented. If this space is properly ventilated outside by using a pipe system, it ensures the removal of moisture and Radon gas present on the ground. It provides speed, simplicity and cost performance in construction to its stakeholders. It offers speed, simplicity and cost performance in construction to its stakeholders. Inspectable subsurface space after manufacturing. Floor elevation without the need for filler material High weight bearing capacity. Requires less on-site storage as the molds can be stacked It saves time with an application that is 80% easier and faster than traditional systems. Thanks to its many columns and domes, it can be adjusted in height up to 3 meters and can be used for ramps, stairs or different level surfaces.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Dome Permanent Formwork Base Fill Application

Dome Permanent Formwork system is a cost-effective and time-saving lightweight construction filling solution that can be used in projects instead of foundation, sub-basement and landscaping fillings on raised floors in buildings, produced from recycled plastics that can be adjusted in height. A hygienic space is obtained on the floors where moisture is prevented. If this space is properly ventilated outside by using a pipe system, it ensures the removal of moisture and Radon gas present on the ground. It provides speed, simplicity and cost performance in construction to its stakeholders. It offers speed, simplicity and cost performance in construction to its stakeholders. Inspectable subsurface space after manufacturing. Floor elevation without the need for filler material High weight bearing capacity. Requires less on-site storage as the molds can be stacked It saves time with an application that is 80% easier and faster than traditional systems. Thanks to its many columns and domes, it can be adjusted in height up to 3 meters and can be used for ramps, stairs or different level surfaces.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Gooplast Dome Permanent Formwork Pool and Environment Application

Dome Permanent Formwork system is a cost-effective and time-saving lightweight construction filling solution that can be used in projects instead of foundation, sub-basement and landscaping fillings on raised floors in buildings, produced from recycled plastics that can be adjusted in height. A hygienic space is obtained on the floors where moisture is prevented. If this space is properly ventilated outside by using a pipe system, it ensures the removal of moisture and Radon gas present on the ground. It provides speed, simplicity and cost performance in construction to its stakeholders. It offers speed, simplicity and cost performance in construction to its stakeholders. Inspectable subsurface space after manufacturing. Floor elevation without the need for filler material High weight bearing capacity. Requires less on-site storage as the molds can be stacked It saves time with an application that is 80% easier and faster than traditional systems. Thanks to its many columns and domes, it can be adjusted in height up to 3 meters and can be used for ramps, stairs or different level surfaces.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Dome Permanent Formwork System Factory Application

Dome Permanent Formwork system is a cost-effective and time-saving lightweight construction filling solution that can be used in projects instead of foundation, sub-basement and landscaping fillings on raised floors in buildings, produced from recycled plastics that can be adjusted in height. A hygienic space is obtained on the floors where moisture is prevented. If this space is properly ventilated outside by using a pipe system, it ensures the removal of moisture and Radon gas present on the ground. It provides speed, simplicity and cost performance in construction to its stakeholders. It offers speed, simplicity and cost performance in construction to its stakeholders. Inspectable subsurface space after manufacturing. Floor elevation without the need for filler material High weight bearing capacity. Requires less on-site storage as the molds can be stacked It saves time with an application that is 80% easier and faster than traditional systems. Thanks to its many columns and domes, it can be adjusted in height up to 3 meters and can be used for ramps, stairs or different level surfaces.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Dome Permanent Formwork System Parking Lot Application

Dome Permanent Formwork system is a cost-effective and time-saving lightweight construction filling solution that can be used in projects instead of foundation, sub-basement and landscaping fillings on raised floors in buildings, produced from recycled plastics that can be adjusted in height. A hygienic space is obtained on the floors where moisture is prevented. If this space is properly ventilated outside by using a pipe system, it ensures the removal of moisture and Radon gas present on the ground. It provides speed, simplicity and cost performance in construction to its stakeholders. It offers speed, simplicity and cost performance in construction to its stakeholders. Inspectable subsurface space after manufacturing. Floor elevation without the need for filler material High weight bearing capacity. Requires less on-site storage as the molds can be stacked It saves time with an application that is 80% easier and faster than traditional systems. Thanks to its many columns and domes, it can be adjusted in height up to 3 meters and can be used for ramps, stairs or different level surfaces.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Arkad Kitchen Application

Arkad Permanent Formwork system, in accordance with the principle of minimum cost and maximum benefit, which constitutes the basic values ​​of lean construction, creates spaces under the screed of mechanical and electrical cable trays, sanitary installation pipes in new or renovated residences and workplaces, offices, business and shopping centers in order to increase efficiency. It is a concrete and reinforced concrete raised floor system with high load carrying capacity. It is a cost-effective and time-saving raised floor solution that can be used under screed in buildings, produced from recycled plastics that can be adjusted to the desired height, with a minimum of 8.5 cm without feet and 12 cm with feet.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

1 mm Joint Clip

We offer our 25 years of experience in plastic injection formworks and injection products to our customers with our GooPlast brand. By producing plastic injection formworks and automation systems in-house, we respond to customer expectations quickly and at the highest level. We produce new design disposable non-removable plastic fixed construction molds for tile flooring system elements (clip and wedge/wedge), ventilated under screed and underfloor cavities, with our strong injection track from 110 tons to 650 tons. We continue to be a solution partner to our customers in the construction sector by increasing the product range day by day, and we produce different designs of non-removable plastic fixed formworks and tile flooring systems according to the needs of architects, civil engineers and construction companies. We are ready to respond to the products you need and to serve as your solution partner.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Dome Permanent Formwork System Outdoor Application

Dome Permanent Formwork System Outdoor Application

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

Wedge

We offer our 25 years of experience in plastic injection formworks and injection products to our customers with our GooPlast brand. By producing plastic injection formworks and automation systems in-house, we respond to customer expectations quickly and at the highest level. We produce new design disposable non-removable plastic fixed construction molds for tile flooring system elements (clip and wedge/wedge), ventilated under screed and underfloor cavities, with our strong injection track from 110 tons to 650 tons. We continue to be a solution partner to our customers in the construction sector by increasing the product range day by day, and we produce different designs of non-removable plastic fixed formworks and tile flooring systems according to the needs of architects, civil engineers and construction companies. We are ready to respond to the products you need and to serve as your solution partner.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

H20-2 mm Joint Clip

We offer our 25 years of experience in plastic injection formworks and injection products to our customers with our GooPlast brand. By producing plastic injection formworks and automation systems in-house, we respond to customer expectations quickly and at the highest level. We produce new design disposable non-removable plastic fixed construction molds for tile flooring system elements (clip and wedge/wedge), ventilated under screed and underfloor cavities, with our strong injection track from 110 tons to 650 tons. We continue to be a solution partner to our customers in the construction sector by increasing the product range day by day, and we produce different designs of non-removable plastic fixed formworks and tile flooring systems according to the needs of architects, civil engineers and construction companies. We are ready to respond to the products you need and to serve as your solution partner.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

3 mm Joint Clip

We offer our 25 years of experience in plastic injection formworks and injection products to our customers with our GooPlast brand. By producing plastic injection formworks and automation systems in-house, we respond to customer expectations quickly and at the highest level. We produce new design disposable non-removable plastic fixed construction molds for tile flooring system elements (clip and wedge/wedge), ventilated under screed and underfloor cavities, with our strong injection track from 110 tons to 650 tons. We continue to be a solution partner to our customers in the construction sector by increasing the product range day by day, and we produce different designs of non-removable plastic fixed formworks and tile flooring systems according to the needs of architects, civil engineers and construction companies. We are ready to respond to the products you need and to serve as your solution partner.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

GooPlast

·Company

2 mm Joint Clip

We offer our 25 years of experience in plastic injection formworks and injection products to our customers with our GooPlast brand. By producing plastic injection formworks and automation systems in-house, we respond to customer expectations quickly and at the highest level. We produce new design disposable non-removable plastic fixed construction molds for tile flooring system elements (clip and wedge/wedge), ventilated under screed and underfloor cavities, with our strong injection track from 110 tons to 650 tons. We continue to be a solution partner to our customers in the construction sector by increasing the product range day by day, and we produce different designs of non-removable plastic fixed formworks and tile flooring systems according to the needs of architects, civil engineers and construction companies. We are ready to respond to the products you need and to serve as your solution partner.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare