Ozler Formwrok & Scaffolding

·Company

Slabform Shoring Scaffolding System

SLABFORM is used as carrier scaffolding under slab and beam. It can be used in 3 different ways such as table form, heavy load scaffold and stair tower. TS EN 74-3 certified base and head jacks are used to balance the floor and the bottom of the formwork. The SLABFORM can be displaced by transport trolleys and crane without disassembling, thus saving labor costs and time. The frames are manufactured as 150 cm width and 120 – 150 – 180 – 200 cm high as standard. TS EN 12813 certified SLABFORM frames are produced from 60 * 3.0 or 60 * 4.0 mm, and horizontal and diagonal braces are produced from 34 * 2.5 mm TSE certified mechanical tubes. Robotic cutting, drilling and welding processes are applied in our production. The steel products are cleaned with sandblasting before oven painting because of the industrial chemical oil. Upon request, our products can be hot dip galvanized according to TS 914 EN ISO 1461 standards.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

Ozler Formwrok & Scaffolding

·Company

Rapido Panel Formwork System

RAPIDO is a steel frame, plywood surfaced panel formwork system carried by crane. In the main frame of the system, specially shaped S355 MC steel profile with high buckling resistance value designed by Welser profile is used. 21 mm birch plywood is used for panel surfaces. Panel widths are 30-45-60-75-90-105-120-240 and heights are produced as 60-90-120-150-180-210-240-270-300-330 cm. With 5 cm perforated profiles used in RAPIDO-UNI panels, wall and column formwork of any size can be easily adjusted and casted. RAPIDO formwork system is designed in accordence with maximum 80 kN/m² concrete pressure. Robotic cutting, drilling and welding processes are applied in our production. The steel products are cleaned with sandblasting before oven painting because of the industrial chemical oil. Upon request, our products can be hot dip galvanized according to TS 914 EN ISO 1461 standards.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

Ozler Formwrok & Scaffolding

·Company

Rapid Panel Formwork System

RAPID is a steel frame, plywood surfaced panel formwork system carried by hand. In the main frame of the system, specially shaped S420 MC steel profile with high buckling resistance value designed by Welser profile is used. 15 mm birch plywood is used for panel surfaces. Panel widths are 30-45-60-75-90 and heights are produced as 60-90-120-150-180-210-240-270-300 cm. With 5 cm perforated profiles used in RAPID-UNI panels, wall and column formwork of any size can be easily adjusted and casted. RAPID formwork system is designed in accordence with maximum 60 kN/m² concrete pressure. Robotic cutting, drilling and welding processes are applied in our production. The steel products are cleaned with sandblasting before oven painting because of the industrial chemical oil. Upon request, our products can be hot dip galvanized according to TS 914 EN ISO 1461 standards.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

Ozler Formwrok & Scaffolding

·Company

Safetyscaff Facade Scaffolding System

SAFETYSCAFF is designed in accordance with European standards with %100 safety rules. TS EN 74-3 certified base jacks are used to balance the floor. With TS EN certified anchor elements, the system is fixed to the facade where it is installed. OZLER provides assembly and disassembly services everywhere in Turkey. TS EN 12810-1, 12810-2, 12811-1 and 12811-2 certified SAFETYSCAFF frames as standard 48 * 3.0 mm, horizontal braces 34 * 2.0 mm and diagonal braces 42 * 2.5 mm TSE certified, mechanically tested industrial tubes. Robotic cutting, drilling and welding processes are applied in our production. Frames, horizontal and diagonal braces and steel decks are hot dip galvanized according to TS 914 EN ISO 1461 standards.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare

Ozler Formwrok & Scaffolding

·Company

Uniscaff Ring Lock Scaffolding System

UNISCAFF is designed in accordance with European standards with %100 safety rules. TS EN 74-3 certified base jacks are used to balance the floor. With TS EN certified anchor elements, the system is fixed to the facade where it is installed. OZLER provides assembly and disassembly services everywhere in Turkey. TS EN 12810-1, 12810-2, 12811-1 and 12811-2 certified UNISCAFF vertical elements are produced as standard 48 * 3.0 mm and horizontal and diagonal elements are made of 48 * 2.5 mm TSE certified industrial tubes. Robotic cutting, drilling and welding processes are applied in our production. Standards, ledgers and steel decks are hot dip galvanized according to TS 914 EN ISO 1461 standards.

Price not defined - Contact for quote

Afghanistan, Aland Islands and 247 more

Like

Start NegotiationShare